Bathroom Remodeling in Chicago, IL

Full Bathroom Renovation Completed in 7 Working Days by Euro Pros

This bathroom remodeling project in Chicago was a complete renovation done on a very tight schedule. The client needed the bathroom finished as quickly as possible, but without cutting corners or sacrificing quality. Our team at Euro Pros completed the entire remodel in 7 working days, delivering a clean, modern, and comfortable space.

One of the biggest issues in this bathroom was a low, inconvenient ceiling that made the room feel cramped and outdated. As part of the remodel, we reworked the ceiling layout, raised the usable height, and visually opened up the space. This change alone made the bathroom feel noticeably larger, brighter, and much more comfortable to use.

Demolition and Preparation

We started with a full demolition of the bathroom. This included removing:

• old drywall and cement boards from the walls.
• drywall from the ceiling.
• the old exhaust fan.
• floor tile.
• outdated fixtures and finishes.

During demolition, the workspace was kept clean and organized so we could move quickly into the next stages without delays.

Subfloor Repairs and Ventilation Work

Once demolition was complete, we discovered rotted subflooring under the toilet area. This is a common issue in older bathrooms and cannot be ignored.

To fix it properly:

• the damaged subfloor was fully removed.
• a new reinforced subfloor was installed using multi-layer plywood.
• the toilet mounting area was additionally strengthened to ensure long-term stability.

We also completed several important ventilation changes:

• under-floor ventilation was relocated.
• venting for the furnace and air conditioning system was moved and brought out in a new location.
• a new layout was prepared for the ceiling exhaust fan after raising the ceiling height.

These changes improved airflow and overall functionality.

Electrical Updates

As part of the remodel, electrical components were updated and relocated where needed:

• the GFCI outlet was moved to a more practical location.
• wiring for the light above the mirror was relocated.
• a new wall switch and a new GFCI outlet were installed.
• a new ceiling exhaust fan was installed.

All electrical work was done with safety and everyday use in mind.

Walls, Floor, and Niche Construction

To ensure durability in wet areas, we used the correct materials throughout the bathroom:

• cement boards were installed on all walls around the bathtub.
• a recessed shower niche was built into the wall.
• cement boards were installed on the floor and on the lower half of the walls around the entire bathroom.
• moisture-resistant drywall was installed on the remaining wall areas and on the ceiling.

The shower niche was finished with mosaic tile, adding a decorative accent, and the shelves inside the niche were made from engineered (artificial) stone, which is durable and easy to maintain.

Waterproofing and Tile Installation

All tile areas were waterproofed using a Mapei liquid waterproofing membrane. The membrane was applied over the cement boards on the floor and on the walls around the bathtub.

The waterproofing was done strictly according to the manufacturer’s instructions. Before applying the membrane, all surfaces were carefully prepared — they were clean, dry, and completely free of dust. This step is critical for proper adhesion and long-term performance.

After the membrane fully cured:

• tile was installed on the bathroom floor.
• tile was installed on the walls, including the tub surround.
• visible tile edges were finished with aluminum decorative trim for a clean, modern look.

Once the tile was installed, the grout joints were filled and then treated with a liquid grout sealer to help protect them from moisture and staining.

Drywall Finishing and Painting

After tile work was complete:

• drywall surfaces were mudded and sanded.
• walls and ceiling were painted.

Combined with the increased ceiling height, the fresh finishes made the bathroom feel much more open and inviting.

Fixtures and Final Details

At the final stage, we installed and connected all new fixtures:

• a new toilet.
• a vanity cabinet with sink.
• a new faucet connected to the water supply.
• a new bathtub faucet and shower system.

We also installed:

• two wall-mounted mirrors.
• a medicine cabinet.
• a toilet paper holder.
• a towel bar on the opposite wall.
• a wall-mounted light above the vanity.

The existing bathroom door was kept. To match the new wall thickness after remodeling, the door jamb depth was increased, and everything was adjusted for a clean, finished look.

All gaps around the bathtub and along the bottom edge of the tile were sealed with high-quality caulk for moisture protection and durability.

Fast Timeline, No Loss of Quality

This full bathroom remodel in Chicago was completed in 7 working days. The fast turnaround was possible thanks to proper planning, clear sequencing of work, and an experienced crew — without skipping important steps like waterproofing, surface preparation, or structural repairs.

Final Result

The finished bathroom feels larger, brighter, and far more comfortable than before. By raising the ceiling height, fixing hidden structural issues, improving ventilation, and using a proper waterproofing system, the bathroom was transformed into a modern, durable space built for everyday use.

Why Homeowners Choose Euro Pros

• full bathroom remodeling in Chicago, IL.
• experience working with low ceilings and complex layouts.
• ability to complete projects on tight timelines.
• strict attention to proper waterproofing and preparation.
• clean, organized, and professional work process.

If you are planning a bathroom remodel in Chicago and want the job done quickly without sacrificing quality, the Euro Pros team is ready to help. Contact us to discuss your project and get a clear, honest estimate.